Parts

Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment. - Highly responsive braking power for greater control and modulation - Sleek and durable master cylinder design - 4-piston calipers provide a wider pad contact area - Heat insulated pads and pistons

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

Full Pin technology uses eleven lightweight, stamped steel cogs held together with 123 high-strength stainless steel pins. The result: a cassette that’s light, durable and equipped with SRAM’s super wide 10-42T gear range that’s a perfect fit for any ride. The open design aids in mud clearance, giving you cleaner shifting performance and longer component life. • Super wide 10-42T gear range is a perfect fit for any ride • Optimized gear steps across entire range • XD driver body creates more stable hub connection

The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence. - Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - Cassette Body Type: Shimano Micro Spline - Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51 - Drivetrain Speeds: 12 - Range: 10-51

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

The People's Champ Years of unrivaled strength and durability have earned the Turbine a place in the crankset hall of fame. Compatibility Ability CINCH System is designed to work with your next bike, the bike after that, and the bike after that. Not So Heavy Metal This crankset is forged to maximize strength then machined to shave away every unnecessary ounce of weight. Work Hard, Play Hard The sickest aluminum crank on the trails, thirty years running. The Turbine delivers an incredibly stiff and responsive ride and tons of versatility thanks to proven Race Face tech. Go ahead, get rowdy–Turbine won't let you down. Specs - Chainline 52mm - 136 Spindle - Includes Pedal Washers (Chain Rings & Bottom Brackets sold separately) - Axle Material 7050 Aluminum - Crank Arm Material 7050 Aluminum - Material 7050 Aluminum - Spindle Diameter (MM) 30 - Weight 622g - Weight Conditions 170mm Arms, 32T Alloy Chain Ring

- Re-designed, compact hood shape wth improved ergonomics - Adjustable reach - Shorter lever throw than previous Tiagra shifters - Compatible with Tiagra 4700 and GRX RX400 components, but not with previous generation 10-speed groups (105 5700, Tiagra 4600, etc.) - Shifter Weight: 260g

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.

- Claris 8 speed shifter/brake levers - Trickle-down lever shape and ergonomy inspired from Dura Ace 9000 - Adjustable reach - Compatible with all 8 speed rear derailleurs and double (R2000) or triple (R2030) road front derailleurs - Includes cables and housing

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts

- Better chain engagement for greater chain retention - Special gear teeth profile designed for MTB riding usage - Smoother driving even over bumpy terrain - For XTR FC-M9100-1, M9120-1 cranks

Shimano XTR M9100 shifters feature fast and intuitive operation. - Right shifter features quicker lever access and light operation force, and is compatible with both 11 and 12-speed drive trains - Left shift features only one shift lever (2-way release)—push lever forward to up-shift; and either push or pull the lever to down-shift

Shimano XTR M9100 shifters feature fast and intuitive operation. - Shimano I-Spec shifters mount directly to brakes so no handlebar clamp is needed - Compatible with 12-speed drive trains - Right shifter features quicker lever access and light operation force, and is compatible with 12-speed drive trains - Left shift features only one shift lever (2-way release)—push lever forward to up-shift; and either push or pull the lever to down-shift

The Hellbender70 bottom bracket utilizes a bearing made of 440C stainless steel, providing exceptional ride quality and reliability. The stainless steel bearing in the Hellbender 70 strikes a perfect balance between value and lasting performance. - 440C stainless steel bearings, dual lip seal, marine grease - Machined aluminum cups

Magura mt thirty disc brake and lever - front or rear hydraulic post mount black - Carbotecture radial master - Flip-flop, easy bleed design - Carbotecture lever-blade and handlebar clamp - 4-piston forged monobloc caliper - Adjustable reach - Adjustable banjo fitting

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

Deore XT BR-M8100 hydraulic disc brake calipers offer powerful braking in a lightweight design. - 4-piston caliper is designed for tough enduro trails - High power braking instills greater downhill confidence and control - Banjo type connection and inside hose routing - Quick and easy assembly

The 611 Ergowave CrMo Saddle was designed to precisely accommodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The chromoly version provides an economic option for those wanting to experience the benefits of the Ergowave. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures for improved power transmission. The lowered nose, in combination with the dip, provides optimal pressure relief for the perineal area. And for even more pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approximately 4mm wider than that of the 612, but just as flat and with the largest possible surface area. The padding was designed for the specific needs on the MTB with better damping properties than the 612, making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. The saddle rails on the non-active versions have been placed slightly closer together to allow for a more flexible shell which mimics the SQlab active technology and allows the saddle shell to follow the biomechanical motion when pedaling. This results in increased comfort, mobilization of the spinal discs and reduced pressure to the sit bones.

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T

With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX812 rear derailleur is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Smooth and reliable mixed-surface shifting - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 2 x 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 2 x 12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 45 teeth - Largest Cog: 45 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

The Shimano SLX CS-M7100 12-speed cassette is optimized with rider-tuned gear combinations for MTB excellence. - Advanced shifting performance provides the confidence to enjoy any trail - Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security - HYPERGLIDE+ technology provides better chain engagement, stronger retention, and smoother pedaling with greater power and confidence over rapidly changing terrain - Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub - The CS-M7100 cassette meets durability requirements for E-MTB applications - Cassette Body Type: Shimano Micro Spline - Drivetrain Speeds: 12 - Range: 10-45 - Designed for ebike: Yes - Color: Silver/Black - Defined Color: Silver

Long hours in the saddle? No problem with the SM Comp Men. This male-specific all-around MTB saddle is great for touring, trail and all-mountain riding. It offers the highest level of comfort through the anatomically optimized relief channel and orthopedic comfort padding. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel. The flattened rear and the Y-shape guarantee full freedom of movement when in the typical MTB riding position. Sliding flanks help reduce friction when pedaling.

Ergon’s SR Sport Gel is the company’s breakthrough innovation in a women’s specific road bike saddle design. It’s shape and relief precisely fit the female anatomy in the rocked-forward position that is experienced on the road and gravel. The soft-tissue and seating area is noticeably more comfortable due to the ergonomically placed gel inlays.

Ride anywhere with the wide-range PG-1230, 11- to 50-tooth Eagle cassette. The NX cassette gives riders every bit of the climbing range that the Eagle ecosystem affords with a simple upgrade to splined-drive body wheels. The PG-1230 is the only Eagle cassette designed to be durable enough to withstand the increased demands of E-MTB applications and a perfect solution to heavy-duty use and abuse. Eagle technology provides an expanded, optimum gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents. Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. SRAM guarantees this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Compatible with a splined driver body - Wide 11-50T gear range—a perfect fit for any ride - Optimized gear steps across entire range - 11-50T: 11, 13, 15, 17, 19, 22, 25, 28, 32, 36, 42, 50

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos