Other

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

RockShox 35mm Seal Kit

Like some of Surly's other chain tensioning devices, Snuggnut keeps your rear wheel from slipping forward in the dropout under the pedal load of your powerful gams. It's specifically designed for bikes that feature 12mm horizontal, vertical-slotted dropouts and is particularly suited for singlespeed application. Snuggnut is CNC-machined for durability and good looks, and shares many design features found on Tuggnut and Hurdy Gurdy. Note: The Snuggnut is compatible with horizontal thru-axle dropouts only. If using 10/12 Adapter Washers and QR wheels use a Tuggnut instead. Snuggnut is not for use with MDS Chips. Compatible models listed below: - Wednesday - ECR 29+ - ECR 27.5+ - Ogre - Krampus - Karate Monkey SS - Karate Monkey 27.5

Seatpost lever and cable set for Giant's Contact Switch Seatpost

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Flat mount rear adapter for a 160mm rotor

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

BB30 Spacer - 15.46mm

SWITCH. A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM FROM ONEUP COMPONENTS. Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with both Shimano Hypergilde+ 12 speed chains and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire - 3 Offsets - Regular, Boost and Super Boost - Quick Change Rings can be replaced in less than a minute with only a 4mm allen key, without removing your crank. Simply loosen the bolts 2 turns, unlock the ring by rotating it by 20 degrees and pull it over and off your crank. Reverse these steps to install your new ring. If you plan to ride a trail that you know is steeper than your local trails, you can switch to a smaller ring in the parking lot, in less time than it takes your friend to put on his riding shoes! SPECS - Material: 7075-T6 - Weight: 69g (30T Boost Cinch Oval) - Chainline: Regular (49mm), Boost (52mm), Super Boost (56.5mm) - Compatibility: Race Face Cinch cranks; 9, 10, 11 and 12 Speed Chains

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

This custom-made Dropper Post Adapter allows Backcountry Saddle Packs to be used on mountain bike dropper seatposts. The adapter is designed to hold the pack securely, while also limiting travel to avoid damage to either the post or the bag. Comes with a choice of shims for dropper posts with 30.9mm, 31.6mm and 34.9mm lower diameters and is easily fitted using a 3mm hex wrench. The broad, flat rear section and ridged strap retainer improve stability over rough terrain and the adapter is also compatible with any bag that uses a 25mm seat post strap (or smaller). - Designed to work with MTB dropper posts with a 25mm or 26mm upper section diameter - Injection moulded glass-reinforced nylon for durability - Silicone shim for a secure fit - 4.5 x 4.8 x 3.5cm - 53g

- 7075 alloy construction with Cr-Mo bolt - Allows threadless stem use on threaded fork - Designed to work with 1-1/8" threadless stems - Converts a 1" threaded fork to 1-1/8" threadless - Provides 1" of additional height extension

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. - 210mm Dropper Post - adjustable down to 190mm - 180mm Dropper Post - adjustable down to 160mm - 150mm Dropper Post - adjustable down to 130mm - 120mm Dropper Post - adjustable down to 100mm

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers

- Grade 10 chromium steel balls

DebonAir air spring assembly to update Yari and Lyrik forks.

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Forged Alloy seat-clamp.

We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34.9/35mm Features - extremely low weight: 7g (31.8mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

- Forged aluminum seatpost clamp and quick release

Fits Norco VPS bikes with a 10mm rear axle. Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0011

CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal to front and rear brakes. Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.

Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors: CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.